Projectors with PAR56 LED lamp, developed to obtain maximum efficiency in electrical consumption. Manufactured for use in swimming pools, where a good and homogeneous distribution of light is required. Available with stainless or ABS trim and in two types of anchoring: Global that is an anchoring system made entirely of plastic or STD in which the fixing is made of stainless steel.
The white light versions are powered at 24Vdc and have the power supply included and the RGB versions are powered at 12Vac by a transformer.
To complete the LumiPlus PAR56 luminaires you must purchase the niche separately. Available niches for concrete pool and prefabricated pool / liner / panels.
Available in the following light colors: cold white, warm white, RGB, RGB-Wireless and RGB-DMX.
The RGB model is compatible with the LumiPlus Eco, LumiPlus Top, LumiPlus LED APP and LumiPlus Modbus controls. The RGB DMX model requires the Lumiplus DMX 41107 Modulator driver.
The Wireless model is compatible with the Lumiplus Control Motion.
To correctly illuminate a swimming pool it is recommended: install a LumiPlus V1 family projector every 20m² of water surface or a LumiPlus V2 family projector every 25m² of water surface.
Note: valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m².
The projectors must always be installed submerged in water.
Power Consumption version V1 White DC: 14W (14VA)
Power Consumption version V1 White AC: 14,5W (20VA)
Power Consumption version V1 RGB / RGB Wireless: 22W (29VA)
Power: 24Vdc (DC white light models) / 12Vac
Lifespan: L70 – 50,000h
Global Versions: Sea water resistant
Standard Versions: Not resistant to sea water