Change country
Spain Portugal France Germany Austria Italy
logo-sticky
Products Filtration High-performance sand filters
Delta 1200 filters
ap_36680_v02_n01-62336.jpg

Delta 1200 filters

back
ap_36680_v02_n01-62336.jpg

Description

Filter laminated in polyester and fibreglass available in diameters of 650, 800, 1000 and 1200 mm. It has a 1.2-m filter bed and is available with an arm collector system and a plate collector system. Complies with filtration requirements as per standard EN 16713-1.
• DN 200 filter lid with quick-locking system for 650 and 800 models and DN 400 bolt down lid for 1000 and 1200 models.
• DN200 lateral manhole with bolt down cover.
• Filter interior left with natural resin finish.
• EASTAR sightglass as standard. Further sight glasses are available on request.
• Inner pipe and fittings in PVC, PP and ABS.
• Pressure gauge included in filter lid.
• Gaskets in EPDM and all screw fittings in stainless steel.
• Vinylester option. In this case, internal layer is manufactured from vinylester resin (and not only the toplayer in contact with the water), to a maximum chemical resistance of 0.4 ppm of ozone dissolved and to amaximum temperature 50o.
• Comes in RAL 5024 blue.

CODE Description Spare Parts
36681 Ø 800 2” 20.1 Arm slots 0.3 mm See Spare Parts
36683 Ø 1200 90 45.2 Arm slots 0.3 mm See Spare Parts
36682 Ø 1000 21/2” 31,4 Arm slots 0.3 mm See Spare Parts
36680 Ø 650 1 1/2” 13.3 Arm slots 0.3 mm See Spare Parts
36691 Ø 1200 mm - Outlet Ø 90 mm - Flow rate 45,2 - Nozzle slots 0,5 mm See Spare Parts
36689 Ø 800 mm - Outlet 2” - Flow rate 20.1 - Nozzle slots 0,5 mm See Spare Parts
36690 Ø 1000 mm - Outlet Ø 2½” mm - Flow rate 31.4 mm - Nozzle slots 0.5 mm See Spare Parts
36688 Ø 650 mm - Outlet Ø 1 ½” mm - Flow rate 13.3 m³/h - Nozzle slots 0.5 mm See Spare Parts
Show less

Document downloads

Product data sheet

Technical Drawings

Warranty sheets

Leaflet

Installation manual

Show less