logo-sticky

Description

The AstralPool automatic cover uses hollow extrusion PVC watertight slats. The end-caps welded at both ends ensure their floatability. The 20 mm wide cap flaps can assure the total length of the slats. These flaps can also be of 10 or 30 mm, thus altering the total width of the pool cover.
The slats are 71.4 mm wide and 17 mm thick, guaranteeing their floatability. In order to avoid stains, specially organic ones, the slats are coated with calcium-zinc.
In order to best integrate the cover into the environment, you can choose from the different slat models: White, Sand, Opaque B lue, Grey, Translucent B lue* and solar captor*.The slats in translucent blue and solar captor
can only be used in Northern Europe or in areas where there is less solar radiation.
* For use only in Northern Europe. Not recommended for use below 45º latitude. For bigger widths, please enquire. ml = meter length.

CODE Description Spare Parts
060588 10,03 < width ≤ 11,03 Sand
33112ANT Maximum width 11 metres WHITE
060645 width ≤ 3,53 Grey
060540 width ≤ 3,53 White
060647 3,53 < width ≤ 4,03 Grey
060648 4,00 < width ≤ 4,50 Grey
060649 4,53 < width ≤ 5,03 Grey
54589 9.03 < width ? 10.03 Grey
061857 width ≤ 3,53 Medium Grey
061858 3,53 < width ≤ 4,03 Medium Grey
061859 4,00 < width ≤ 4,50 Medium Grey
061862 5,53 < width ≤ 6,03 Medium Grey
061863 6,03 < width ≤ 7,03 Medium Grey
061864 7,03 < width ≤ 8,03 Medium Grey
061865 8,03 < width ≤ 9,03 Medium Grey
061866 9,03 < width ≤ 10,03 Medium Grey
061867 10,03 < width ≤ 11,03 Medium Grey
061860I 4.53 < width ? 5.03 Medium Grey
061861I 5,03 < width ? 5,53 Medium grey
Show less

Document downloads

Generic manual

Show less