Control box for pump control and underwater light

Swimming Pool Pumps Control boxes Control box for pump control and underwater light

Control box for pump control and underwater light with diferential protection – single-phase.

IP-65 protection. Transparent glass with lock and keys. All products are compatible with:
– 220/240V 1-phase (P+N+T) 50Hz/60Hz
– 380/415V 3-phase (3P+N+T) 50Hz/60Hz
– 220/230V 3-phase (3P+T) 50Hz/60Hz

24H master clock with ¼h steps. Conection for pump remote control (run/stop,…), for the auxiliar equipment (cold detector,…). All the products are supplied with:
– Electric scheme.
– Connection diagram.
– Installation instructions.
– CE certification.
– Gland for each cable input and output.
– Screws and stoppers (4) for wall installation.

The control box must be chosen according to the filtration pump nominal current:

Magnetothermic protection (2 pumps: 1ª from 6 to 10A and 2ª from 2 to 10A) contactor, 24h program clock . 3 positions: Auto / 0 / Manual. 230V 10A protected output for lights. 12V 315VA protected output for 1 underwater light.

  • Códigos
  • Descargas
Código Descripción Recambios Documentos BIM
25725 Type A (see technical table)
25726 Type B (see technical table)
25727 Type C (see technical table)
25728 Type D (see technical table)
Type A (see technical table)
Type B (see technical table)
Type C (see technical table)
Type D (see technical table)