Automatic covers: Spare parts

Spare parts for automatic covers

  • Códigos
  • Descargas
Código Descripción Recambios Documentos BIM
31212 Stainless Steel. Motor shaft length 490 mm. (standard).
31213 Stainless Steel. Motor shaft length 600 mm.
31214 Stainless steel bearings 62 x 30 x 16 316L.
31215 Watertight cyclam ball-race.
31216 Ceramic backing for bushings.
31217 2 bushing clamp joints.
31218 2 bearing joints.
31219 Bushing clamp.
31220 Bearing flange.
31221 Bearing.
31222 250 Nm 24V reducer motor.
31223 120 Nm 24V reducer motor.
31224 120 Nm 24V Tubular motor.
31225 220V/24V electrical switchboard.
31226 220V/24V tubular motor electrical switchboard.
31227 3-position key switch with auto return.
31228 Stainless steel motor support.
31229 Zamac counterweight.
31230 Key switch for Carlit model.
31231 146 mm D. Aluminium axle with L. 4 m Stainless Steel shaft.
31232 146 mm D. Aluminium axle with L. 5 m Stainless Steel shaft.
31233 146 mm D. Aluminium axle with L. 6 m Stainless Steel shaft.
31234 71 mm right slat end-cap to be glued.
31235 71 mm left slat end-cap to be glued.
31236 1 lt PVC S3 (thick) glue for end-caps.
31237 1 lt PVC 914 (liquid) glue for end-caps.
31238 Roussillon model slat strap fasteners L. 150 mm.
31239 Carlit model slat strap fasteners L. 800 mm.
31240 Fixing plate for axle straps.
31241 Stainless steel screw A4 6 x 20 p/ fixing plates + nuts.
31242 1.30 m turnbuckle for counterweight.
31243 220V/24V 400 VA transformer.
31244 220V/24V 200 VA transformer.
31245 Rectifier (diode connection) 24V – 25 Amp.
31246 15 Amp thermal circuit breaker.
31247 10000 microfarad filter condenser.
31248 End-stop catch Aquajunior MTS 20/30 motors.
31249 Electronic card for Aquamat motor.
31250 Electronic card for Aquajunior motor.
31251 Watertight end-stop switches.
31252 Stainless steel. key 8 x 7 mm L. 60 mm.
31253 Stainless steel screw 6 pans M10 x 70 mm p/ bearing fixation.
31943 Overflow pool bracket
31944 Sky cover, above-ground model
34754 Lift-prevention bracket in ABS for wall fixing + belts
34774 Flange belt
34777 Power supply at water level with dry contacts for electrolysis
35131 ABS bracket + S.S. support to install under the coping stone + belt
35151 Power supply for motor at water level
37142 Motor side vertical bracket with gears for Rousillon model at water level
37210 Carlit solar cover + electronic card.
37212 Lead battery REC 12V-12AH.
38510 Additional box for 120 Nm electrolysis (Carlit and Narbonne)
38511 Additional box for 150 Nm electrolysis (Carlit and Narbonne)
38555 White right cover to glue to lug.
38556 White left cover to glue to lug.
38557 Blue right cover to glue to lug.
38558 Blue left cover to glue to lug.
38559 Sand right cover to glue to lug.
38739 Solar battery charger for Carlit or Narbonne models
38825 Power supply box 250 N PL3000-24 V tubular motor
38899 220V/12V-100VA Carlit tubular 150 Nm motor power supply
Stainless Steel. Motor shaft length 490 mm. (standard).
Stainless Steel. Motor shaft length 600 mm.
Stainless steel bearings 62 x 30 x 16 316L.
Watertight cyclam ball-race.
Ceramic backing for bushings.
2 bushing clamp joints.
2 bearing joints.
Bushing clamp.
Bearing flange.
Bearing.
250 Nm 24V reducer motor.
120 Nm 24V reducer motor.
120 Nm 24V Tubular motor.
220V/24V electrical switchboard.
220V/24V tubular motor electrical switchboard.
3-position key switch with auto return.
Stainless steel motor support.
Zamac counterweight.
Key switch for Carlit model.
146 mm D. Aluminium axle with L. 4 m Stainless Steel shaft.
146 mm D. Aluminium axle with L. 5 m Stainless Steel shaft.
146 mm D. Aluminium axle with L. 6 m Stainless Steel shaft.
71 mm right slat end-cap to be glued.
71 mm left slat end-cap to be glued.
1 lt PVC S3 (thick) glue for end-caps.
1 lt PVC 914 (liquid) glue for end-caps.
Roussillon model slat strap fasteners L. 150 mm.
Carlit model slat strap fasteners L. 800 mm.
Fixing plate for axle straps.
Stainless steel screw A4 6 x 20 p/ fixing plates + nuts.
1.30 m turnbuckle for counterweight.
220V/24V 400 VA transformer.
220V/24V 200 VA transformer.
Rectifier (diode connection) 24V – 25 Amp.
15 Amp thermal circuit breaker.
10000 microfarad filter condenser.
End-stop catch Aquajunior MTS 20/30 motors.
Electronic card for Aquamat motor.
Electronic card for Aquajunior motor.
Watertight end-stop switches.
Stainless steel. key 8 x 7 mm L. 60 mm.
Stainless steel screw 6 pans M10 x 70 mm p/ bearing fixation.
Overflow pool bracket
Sky cover, above-ground model
Lift-prevention bracket in ABS for wall fixing + belts
Flange belt
Power supply at water level with dry contacts for electrolysis
ABS bracket + S.S. support to install under the coping stone + belt
Power supply for motor at water level
Motor side vertical bracket with gears for Rousillon model at water level
Carlit solar cover + electronic card.
Lead battery REC 12V-12AH.
Additional box for 120 Nm electrolysis (Carlit and Narbonne)
Additional box for 150 Nm electrolysis (Carlit and Narbonne)
White right cover to glue to lug.
White left cover to glue to lug.
Blue right cover to glue to lug.
Blue left cover to glue to lug.
Sand right cover to glue to lug.
Solar battery charger for Carlit or Narbonne models
Power supply box 250 N PL3000-24 V tubular motor
220V/12V-100VA Carlit tubular 150 Nm motor power supply