Motor on the shaft

The motor is integrated into the interior of the roller axle and can be installed in already existing pools of up to 6 metres in width.
As in the Roussillon model the submerged zone containing the roller axle should be separated by a small concrete partition at the time of construction or later with a PVC partition. The slat colours available for both models are white, beige and opaque blue.

  • Códigos
  • Descargas
Código Descripción Recambios Documentos BIM
33069 Max. pool dimensions 4 x 9 m. 120 Nm motor (axle without end-stop)
33070 Max. pool dimensions 4 x 9 m. 250 Nm motor (axle with end-stop)
33071 Max. pool dimensions 5 x 12 m. 120 Nm motor (axle without end-stop)
33072 Max. pool dimensions 5 x 12 m. 250 Nm motor (axle with end-stop)
33073 Max. pool dimensions 6 x 14 m. 250 Nm motor (axle with end-stop)
33906 Max. pool dimensions 7 x 15 m. 250 Nm motor (axle with end-stop)
Max. pool dimensions 4 x 9 m. 120 Nm motor (axle without end-stop)
Max. pool dimensions 4 x 9 m. 250 Nm motor (axle with end-stop)
Max. pool dimensions 5 x 12 m. 120 Nm motor (axle without end-stop)
Max. pool dimensions 5 x 12 m. 250 Nm motor (axle with end-stop)
Max. pool dimensions 6 x 14 m. 250 Nm motor (axle with end-stop)
Max. pool dimensions 7 x 15 m. 250 Nm motor (axle with end-stop)