Multiflow return inlet threated for liner

MULTIFLOW SYSTEM
The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25, enabling the required flow to be selected at the time of installation.
Recommended max flow 4 m/sec., complies with UNE 13451-1:
Ø 14 mm = 30 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h For liner pools, white ABS plastic with gaskets and screws. External thread of 2″, Ø 50 mm solvent internal. Installation with wall conduits 15662 or 15663 is recommended.

Item available in White, Beige, Light Gray and Anthracite colors.

Complies with standars:
EN 16582-1
EN 16713-2

  • Códigos
  • Descargas
Código Descripción Recambios Documentos BIM
00330 Liner return inlet Ver recambios
00330CL090 INLETMULTIFLOW WITH 2’’ GLUED THREAD (Ø50 mm) Beige Ver recambios
00330CL129 INLETMULTIFLOW WITH 2’’ GLUED THREAD (Ø50 mm) Light gray Ver recambios
00330CL144 INLETMULTIFLOW WITH 2’’ GLUED THREAD (Ø50 mm) Anthracite Ver recambios
Liner return inlet
INLETMULTIFLOW WITH 2’’ GLUED THREAD (Ø50 mm) Beige
INLETMULTIFLOW WITH 2’’ GLUED THREAD (Ø50 mm) Light gray
INLETMULTIFLOW WITH 2’’ GLUED THREAD (Ø50 mm) Anthracite