Multiflow return inlet to glue PN 6

MULTIFLOW SYSTEM

The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation.

Recommended max flow 4 m/sec., complies with EN 13451-1:

Ø 14= 2,2 m3/h, Ø20 = 4,5 m3/h, Ø25 = 7 m3/h. To glue onto Ø 63 mm, outside 6 bar pipe and inside Ø 50 mm. Made in white ABS. Can be installed with wall conduits: 15661-15660. Grille slots are < 8 mm. Complies with EN 13451-1.

Complies with standards:
EN 16582-1
EN 16713-2

  • Códigos
  • Descargas
Código Descripción Recambios Documentos BIM
00298 Return inlet Multiflow for gluing White Ver recambios
00298CL090 Multiflow return inlet to be glued – Beige
00298CL129 Multiflow return inlet to be glued – Light grey
00298CL144 Multiflow return inlet to be glued – Anthracite grey
Return inlet Multiflow for gluing White
Multiflow return inlet to be glued – Beige
Multiflow return inlet to be glued – Light grey
Multiflow return inlet to be glued – Anthracite grey