White Light Projectors

RAPID projectors whose special feature lies in the easy assembly in the pool thanks to the connection in 1 “1/2 nozzles.
With an extra-flat front to offer an integrating design in the pool. Thanks to the adapters, it can also be installed in a Ø59 bushing or 2 “thread and in Ø63 tubes in both PN6 and PN10. You can also install it in the Lumiplus Mini 53596 and 59983 niches (only the liner model)
Available in the following light colors: cold white 5700K and warm white 3000K.
Supplied with replaceable 2 x 1mm2 cable and a length of 2.5 m.
To properly illuminate a swimming pool, it is recommended to: install a projector of the LumiPlus family
Rapid every 20 m² of water surface.
Note: Valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m2.
Power Consumption White: 16W (24VA)
Power: 12Vac
Lifespan: L70 – 50,000h

  • Códigos
  • Descargas
Código Descripción Recambios Documentos BIM
64339 LumiPlus Rapid V1 White for liner pools
LumiPlus Rapid V1 White for liner pools