PAR 56 replacement lamps

PAR 56 replacement lamps

PAR56 LED lamp, developed to obtain maximum efficiency in electrical consumption. Use in swimming pools, where a good and homogeneous distribution of light is required.
The white light versions are powered at 24Vdc and have the power supply included and the RGB versions are powered at 12Vac by a transformer.
Compatible with PAR56 projectors.
Available in the following light colors: cold white, warm white, RGB, RGB-Wireless and RGB-DMX.
The RGB model is compatible with the LumiPlus Eco, LumiPlus Top, LumiPlus LED APP and LumiPlus Modbus controls. The RGB DMX model requires the Lumiplus DMX 41107 Modulator driver.
The Wireless model is compatible with the Lumiplus Control Motion.
In order to properly illuminate a swimming pool, it is recommended to install a lamp of the LumiPlus V1 family every 20m² of water surface or one of the LumiPlus V2 family every 25m² of water surface.
Note: valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m².
The lamps should always be installed submerged in water.
Power Consumption version V1 White DC: 14W (14VA)
Power Consumption version V1 White AC: 16W (24VA)
Power Consumption version V1 RGB / RGB Wireless: 27W (37 VA)
Power Consumption version V2 White DC: 32W (32VA)
Power Consumption version V2 RGB / RGB DMX: 48W (64 VA)
Power: 24Vdc (DC white light models) / 12Vac
Lifespan: L70 – 50,000h