Projector wall mount. It does not require a niche and its anchoring is done through a plastic cross bracket that is included with the projector. There are two models according to the type of pool in which you want to install, model for concrete pools and model for fiber pools.
Available in the following light colors: cold white, neutral white, warm white, red, blue, green, RGB, RGB-Wireless and RGB-DMX.
The RGB model is compatible with the LumiPlus Eco, LumiPlus Top, LumiPlus LED APP and LumiPlus Modbus controls. The RGB DMX model requires the Lumiplus DMX 41107 Modulator driver.
The Wireless V1 model is compatible with the Lumiplus Control Motion.
To correctly illuminate a swimming pool it is recommended: install a LumiPlus V1 family projector every 20m² of water surface or a LumiPlus V2 family projector every 25m² of water surface.
Note: valid recommendations for pools with light colors and for projectors with white light, oversize in RGB colors. In pools of dark colors or stainless steel it is recommended to oversize the proportion of projectors per m².
The projectors must always be installed submerged in water.
Power Consumption version V1 White / RGB: 16W (24 VA) / 27W (37 VA)
Power Consumption version V2 White / RGB: 58W (60 VA) / 48W (64 VA)
Lifespan: L70 – 50,000h